Visualizza Ingrandimento
|
HIGH VOLTAGE SERVO modello HV787 (Alluminium upper case)
|
( - )
|
€ 70,00
|
|
| Dead band: |
0.0008 ms (Default) |
| Control System: |
+Pulse Width Control |
| Working frequence: |
1520?s / 333hz |
| (RX) Required Pulse: |
3.5 ~7.4 Volt Peak to Peak Square Wave |
| Operating Voltage: |
6.0 ~7.4 V DC Volts |
| Operating Temperature Range: |
-10 to + 60 Degree C |
| Operating Speed (6.0V): |
0.041 sec/60° degrees at no load |
| Operating Speed (7.4V): |
0.033 sec/60° degrees at no load |
| Stall Torque (6.0V): |
6.85 kg.cm
|
| Stall Torque (7.4V): |
8.44 kg.cm
|
| 360° Modifiable: |
NO |
| Motor Type: |
Coreless Motor |
| Potentiometer Drive: |
Indirect Drive |
| Driver Type: |
FET |
| Bearing Type: |
Dual Ball Bearings |
| Gear Type: |
Titanium Gears |
| Programmable: |
NO |
| Connector Wire Length: |
15.0 cm
|
| Dimensions: |
40X20X43 mm
|
| Weight: |
79.5 g
|
|
|
|
| |
Recensioni Clienti:
Nessuna recensione disponibile per questo prodotto.
Autenticati per poter scrivere una recensione. |
|
|
|
|
Tel.: 080-5425463
Chiedi per email
